20% Off MSRP
M62 Series Magnalock by Securitron, 1200lbs
$452.00
$565.00
Overview
1200 pounds holding force Magnalock with automatic dual voltage. Recommended for exterior and perimeter doors through which criminals could gain entrance to cause substantial economic loss.
Features:
- Patented instant release circuit - no residual magnetism
- Surface mounts easily with a minimum of tools
- Fully sealed electronics - tamper proof and weatherproof
- Architectural brushed stainless steel finish (US32D/630)
- All ferrous metal surfaces plated to MIL specification
- Hardware accessories available to configure any opening
- Ten feet [3.05m] of jacketed, stranded conductor
- Automatic dual voltage - no field adjustment required
- Lock options include BondSTAT magnetic bond sensor and integrated door position switch
- UL Listed
*The M62 with strike requires minimum 2.5 inches of flat mounting space
Product Details
M62 Series Magnalock by Securitron, 1200lbs holding force
Product Overview
1200 pounds holding force Magnalock with automatic dual voltage. Recommended for exterior and perimeter doors through which criminals could gain entrance to cause substantial economic loss.
Product Features
- Patented instant release circuit - no residual magnetism
- Surface mounts easily with a minimum of tools
- Fully sealed electronics - tamper proof and weatherproof
- Mounted using steel machine screws into blind finishing nuts
- Architectural brushed stainless steel finish (US32D/630)
- All ferrous metal surfaces plated to MIL specification
- Hardware accessories available to configure any opening
- Dress Covers available
- Ten feet [3.05m] of jacketed, stranded conductor
- Automatic dual voltage - no field adjustment required
- Lock options include BondSTAT magnetic bond sensor and integrated door position switch
- Universal threaded conduit fitting is 1/2 inch female - 3/4 inch male
- UL Listed, UL294
Specification Data
- Magnet size: 8 inches L x 1.75 inches W x 2.9 inches H
- Armature size: 6 inches L x 0.5 inch W x 2.75 inches H
- Current Draw and Voltage: 250mA at 12VDC; 150mA at 24VDC
- Operating Temperature: -40 to +140F [-40 to +60C]
Models
- M62 - (Magnalock Model M62)
- M62F - (M62, Face Mount)
- M62FG - (M62, Face Mount, Conduit)
- M62FGB - (M62, Face Mount, Conduit, Mag Bond Sensor)
- M62FGBD - (M62, Face Mount,Conduit, Mag Bond Sensor, Door Position Switch)
- M62FGD - (M62, Face Mount, Conduit, Door Position Switch)
- M62FD - (M62, Face mount, Door Position Switch)
- M62G - (M62, Conduit)
- M62GB - (M62, Conduit, Mag Bond Sensor)
- M62GBD - (M62, Conduit, Mag Bond Sensor, Door Position Switch)
- M62GD - (M62, Conduit, Door Position Switch)
- M62B - (M62, Mag Bond Sensor)
- M62FB - (M62, Face Mount, Mag Bond Sensor)
- M62FBD - (M62, Face Mount, Mag Bond Sensor, Door Position Switch)
- M62BD - (M62, Mag Bond Sensor, Door Position Switch)
- M62D - (M62, Door Position Switch)
Warranty
Also Known As
SEC100M62, SN-M62, HES-M62Finish
Stainless SteelManufacturer
SecuritronManufacturer Warranty
LifetimeModel Number
M62Power Requirements
24VDC/12VDCStatus Monitor
OptionalUPC Code
784607028390
3 Questions asked on M62 Series Magnalock by Securitron, 1200lbs •
Q
Brent Clingingsmith • 01/29/2021, 4:10:36 PM
I have the M62 SERIES MAGNALOCK that I have installed on a steel door. With the plate in hand the magnet is very strong, but after attaching it to the door the magnet becomes very weak. I have isolated the plate from the door, but still having that issue. Any ideas?
A
02/01/2021, 5:45:42 PM
It sounds like a potential alignment issue between the maglock & plate once mounted. First, make sure there are no gaps between the maglock and plate when the door is closed. Second, check the center bolt holding the plate to the door and confirm it is not overtightened. The plate must be able to "float" as this will allow for proper self-alignment when mating to the magnetic lock face. For further assistance, please have your order number handy and give our Technical Support a call at 1-866-500-5625
Q
Charlie Wulf • 02/17/2021, 3:34:41 PM
What does the FG stand for on the M62
A
02/19/2021, 10:57:13 AM
F = Face Drilled Mounting Holes, G = Conduit Fitting. The M62FG would include both of those options. To go over any additional questions regarding the M62 or configuration options, please give us a call at 1-866-500-5625
- 1
- 2
