Hot!
Complete Single Door Magnetic Lock kit
$634.48
Overview
Complete single door access control system with magnetic lock (600lb or 1200lb) and PIN/Prox reader.
Kit Includes:
- 1 each CC-3800EM Weather Proof, Indoor/Outdoor, Digital keypad + proximity reader
- 5 each PCS-1 proximity cards
- 1 each magnetic lock (select below)
- 1 each PS520W Request to exit motion detector
- 1 each TS-2 Request to exit pushbutton
- 1 each HUB-2SA under desk mount remote release button
- 1 each MC-1 12VDC 1.2 amp power supply and metal enclosure
- 1 each SLA1055 12VDC backup battery (included with MC-1 power supply)
- 1 each Complete wiring diagram and 100% free over the phone tech support!!
For assistance with this kit please use the Live Chat feature or Call us Toll Free at 1-866-500-5625
Product Details
Product Overview
Single door access control system includes a magnetic lock (600lbs or 1200lbs), PIN/Prox reader for entry, Request to Exit devices and Power Supply with battery backup.
The remote release button can be wired to allow door release from almost anywhere in the building.
Power supply with battery backup ensures your door remains secure and all system components remain operational in the event of a power failure.
Features
- PIN, Prox card or PIN + Prox card entry
- 2000 user capacity
- All programming is done through the keypad
- 1 form C relay
- Electronics are epoxy sealed, IP68 rated (will accept PIN codes and Prox cards while completely submerged in up to 1 meter of water)
- Metal vandel resistant construction, includes security screws and built in anti-tamper alarm
- 5 PCS-1 Prox cards included with keypad purchase
Specifications
- Single Gang Keypad Dimensions: 4-3/4 inches L x 3-1/8 inches W x 1 inch D
- Narrow Keypad Dimensions: 4-3/4 inches L x 2-1/4 inches W x 7/8 inches D
- LK-M06L Lock Dimensions: 9.84 inches L x 1.86 inches H x 1.05 inches D
- LK-M12L Lock Dimensions: 10.47 inches L x 2.87 inches H x 1.57 inches D
- Power Supply Specifications: 1.2amp at 12VDC
- Estimated Battery Backup Life (PS1250) with single maglock system: 7 1/2 hours
Single Door Kit Includes
- 1 each CC-3800EM Weather Proof, Indoor/Outdoor, Digital keypad + proximity reader
- 5 each PCS-1 proximity cards
- 1 each magnetic lock (select below)
- 1 each PS520W Request to exit motion detector
- 1 each TS-2 Request to exit pushbutton
- 1 each HUB-2SA under desk mount remote release button
- 1 each MC-1 12VDC 1.2 amp power supply and metal enclosure
- 1 each SLA1055 12VDC backup battery (included with MC-1 power supply)
- 1 each Complete wiring diagram and 100% free over the phone tech support!!
For assistance with this kit please use the Live Chat feature or Call us Toll Free at 1-866-500-5625
Also Known As
single door magnetic lock kit, Complete Door magnetic lock kitManufacturer
Maglocks.comManufacturer Warranty
2 YearModel Number
single door maglock kitPower Requirements
12VDC
5 Questions asked on Complete Single Door Magnetic Lock kit •
Q
Jacob Weintraub • 03/20/2021, 4:18:21 PM
Can you integrate a relay to tie into the fire alarm?
A
03/22/2021, 1:08:08 PM
If this is on an existing project, please give us a call and we can discuss options that may be available to integrate a relay into this system. If this is for a new project, we can work with you to build a custom solution that would include a power supply with built-in fire alarm interface. 1-866-500-5625
Q
Dustin Samford • 11/30/2022, 1:14:27 PM
Are there any compatible peel and stick fobs that work with the cobra controls access locks? Will any writable 26 bit fob work?
We already utilize writable fobs for existing maglocks and gate operators but they can not be programmed with the Cobra controller.
A
12/01/2022, 1:54:09 PM
No, not all 26-bit cards/fobs would be compatible as there are a variety of different formatting options. Please see the "PST-2" peel and stick tags that would be compatible with the proximity readers in this package. For assistance with putting together a custom package that may work with your existing cards/tags please give us a call direct at 1-866-500-5625
