20% Off MSRP
M62 Series Magnalock by Securitron, 1200lbs
$444.80
$556.00
Overview
1200 pounds holding force Magnalock with automatic dual voltage. Recommended for exterior and perimeter doors through which criminals could gain entrance to cause substantial economic loss.
Features:
- Patented instant release circuit - no residual magnetism
- Surface mounts easily with a minimum of tools
- Fully sealed electronics - tamper proof and weatherproof
- Architectural brushed stainless steel finish (US32D/630)
- All ferrous metal surfaces plated to MIL specification
- Hardware accessories available to configure any opening
- Ten feet [3.05m] of jacketed, stranded conductor
- Automatic dual voltage - no field adjustment required
- Lock options include BondSTAT magnetic bond sensor and integrated door position switch
- UL Listed
*The M62 with strike requires minimum 2.5 inches of flat mounting space
Product Details
M62 Series Magnalock by Securitron, 1200lbs holding force
Product Overview
1200 pounds holding force Magnalock with automatic dual voltage. Recommended for exterior and perimeter doors through which criminals could gain entrance to cause substantial economic loss.
Product Features
- Patented instant release circuit - no residual magnetism
- Surface mounts easily with a minimum of tools
- Fully sealed electronics - tamper proof and weatherproof
- Mounted using steel machine screws into blind finishing nuts
- Architectural brushed stainless steel finish (US32D/630)
- All ferrous metal surfaces plated to MIL specification
- Hardware accessories available to configure any opening
- Dress Covers available
- Ten feet [3.05m] of jacketed, stranded conductor
- Automatic dual voltage - no field adjustment required
- Lock options include BondSTAT magnetic bond sensor and integrated door position switch
- Universal threaded conduit fitting is 1/2 inch female - 3/4 inch male
- UL Listed, UL294
Specification Data
- Magnet size: 8 inches L x 1.75 inches W x 2.9 inches H
- Armature size: 6 inches L x 0.5 inch W x 2.75 inches H
- Current Draw and Voltage: 250mA at 12VDC; 150mA at 24VDC
- Operating Temperature: -40 to +140F [-40 to +60C]
Models
- M62 - (Magnalock Model M62)
- M62F - (M62, Face Mount)
- M62FG - (M62, Face Mount, Conduit)
- M62FGB - (M62, Face Mount, Conduit, Mag Bond Sensor)
- M62FGBD - (M62, Face Mount,Conduit, Mag Bond Sensor, Door Position Switch)
- M62FGD - (M62, Face Mount, Conduit, Door Position Switch)
- M62FD - (M62, Face mount, Door Position Switch)
- M62G - (M62, Conduit)
- M62GB - (M62, Conduit, Mag Bond Sensor)
- M62GBD - (M62, Conduit, Mag Bond Sensor, Door Position Switch)
- M62GD - (M62, Conduit, Door Position Switch)
- M62B - (M62, Mag Bond Sensor)
- M62FB - (M62, Face Mount, Mag Bond Sensor)
- M62FBD - (M62, Face Mount, Mag Bond Sensor, Door Position Switch)
- M62BD - (M62, Mag Bond Sensor, Door Position Switch)
- M62D - (M62, Door Position Switch)
Warranty
Also Known As
SEC100M62, SN-M62, HES-M62Finish
Stainless SteelManufacturer
SecuritronManufacturer Warranty
LifetimeModel Number
M62Power Requirements
24VDC/12VDCStatus Monitor
OptionalUPC Code
784607028390
3 Questions asked on M62 Series Magnalock by Securitron, 1200lbs •
Q
Anna • 05/03/2022, 2:27:19 PM
Which Z Bracket would be needed for the M62FGBD lock?
A
05/04/2022, 10:15:04 AM
Adjustable Z brackets for inswing doors and gates can be found under the options section of the M62 listing. The bracket part number would be ZA-62 and they can be purchased in three different finish options (clear aluminum, black or stainless steel). For further assistance with your project please give us a call direct at 1-866-500-5625
- 1
- 2
